Comco-PA 6 C
Polyamide 6 cast (PA 6/c) is a universal material for mechanical engineering applications. It features high mechanical strength combined with sufficient toughness and very good machinability. Its properties can be optimized for specific applications by adding other materials. The casting process allows for a wide range of shapes.
Colours: natural, black. Other colours on request
Characteristics:
- Excellent mechanical properties
- High chemical resistance
- High wear resistance
- Good machinability
Application areas:
- PA 6 C is used for various types of pulleys, bearings, rope sheaves and gear wheels.
- PA6C natural (ivory)
- PA6C MO black
- PA6C Colour
- PA6C Moß2 anthracite – black
- PA6C OL
- PA6C Wax
- PA6C Mod. / Powerglide
- PA6C Heat
- PA6C HIGH IMPACT
PA6C natural (ivory)
Our premium-quality polyamide 6 cast in natural (ivory) with prompt availability. The universal material for general structural parts in plant and mechanical engineering. PA6C has very good antifriction properties and good resistance to gamma and X-rays.
Colour: natur
Round bars / Discs: Ø 50–2100 mm
Sheets (thicknesses): 10–100 mm
Blocks (thicknesses): 110–500 mm
Tubes / Rings: OD Ø 50–2100 mm
PA6C MO black
This variant exhibits improved crystallisation and self-lubrication thanks to the addition of molybdenum sulphides. The hardness is increased and at the same time the general mechanical, frictional and wear behaviour is improved. The material is produced in black.
Colour: black
Round bars / Discs: Ø 50–2100 mm
Sheets (thicknesses): 10–100 mm
Blocks (thicknesses): 110–500 mm
Tubes / Rings: OD Ø 50–2100 mm
PA6C Colour
Our premium-quality polyamide 6 cast specially dyed for your application. PA6C is available in red, yellow, green and blue. Further colours available on request.
Colours: red, yellow, green, blue
Round bars / Discs: Ø 100–2100 mm
Sheets (thicknesses): 20–100 mm
Blocks (thicknesses): 110–500 mm
Tubes / Rings: OD Ø 50–2100 mm
PA6C Moß2 anthracite – black
PA6C Moß2 is modified by the addition of molybdenum disulfide (Moß2). The hardness is increased and at the same time the general mechanical properties and the friction and wear behavior are improved. The material is produced in the color anthracite – black.
Colours: anthracite
Round bars / Discs: Ø 50–2100 mm
Sheets (thicknesses): 10–100 mm
Blocks (thicknesses): 110–500 mm
Tubes / Rings: OD Ø 50–2100 mm
PA6C OL
PA6C OL is modified with an incorporated liquid lubricant, which is distributed in the material in microscopically small droplets. This material is ideal when the stick-slip effect is to be improved. This material is perfectly suited for slowmoving, dry-running sliding elements. Applications include bearing bushings, guides and curve guides. PA6C OL is available in yellow and black as standard, and in other colours on request.
Colours: yellow, black
Round bars / Discs: Ø 50–2100 mm
Sheets (thicknesses): 10–100 mm
Blocks (thicknesses): 110–500 mm
Tubes / Rings: OD Ø 50–2100 mm
PA6C Wax
The wax-modified polyamide 6 cast is characterised by better antifriction properties than the unfilled type. Applications include sliding elements and guide pieces, as well as sliding strips of all kinds. PA6C WAX is available in grey.
Colour: gray
Round bars / Discs: Ø 100–2100 mm
Sheets (thicknesses): 20–100 mm
Blocks (thicknesses): 110–500 mm
Tubes / Rings: OD Ø 50–2100 mm
PA6C Mod. / Powerglide
This modified polyamide type was specially developed for structural parts where antifriction and wear properties are extremely important to ensure reliable operation over an extended period. Compared to metal, this construction material is characterised by lower weight. Powerglide also has better tribological properties than unfilled plastics. If the antifriction properties of PE 1000 are required, as well as the superior wear resistance and high mechanical strength of polyamide, Powerglide is the ideal material. Applications include sliding and bearing elements, wear strips and heavy-duty pulleys in all areas of mechanical engineering, crane construction and conveyor technology. Curve guides, toothed and sprocket wheels are further examples of applications. Powerglide is available in green as standard, and in other colours upon request.
Colour: green
Round bars / Discs: Ø 50–2100 mm
Sheets (thicknesses): 10–100 mm
Blocks (thicknesses): 110–500 mm
Tubes / Rings: OD Ø 50–2100 mm
PA6C Heat
Modified with a thermal-aging stabiliser, this material has excellent resistance to thermal influences under stress. The standard colour is blue.
Colour: blue
Round bars / Discs: Ø 100–2100 mm
Sheets (thicknesses): 20–100 mm
Blocks (thicknesses): 110–500 mm
Tubes / Rings: OD Ø 50–2100 mm
PA6C HIGH IMPACT
This polyamide, which is also produced by the pressureless casting process, is a blended product based on caprolactam (the raw material for PA6C) and Laurinlactam (the raw material for PA12C). Compared to pure PA6C, the material has a lower water absorption and higher toughness. Applications include gear wheels, inlet and outlet star wheels or track rollers. PA6C HIGH IMPACT is available in natural / yellowish colours.
Colours: natural / yellow
Round bars / Discs: Ø 100–2100 mm
Sheets (thicknesses): 20–100 mm
Blocks (thicknesses): 110–500 mm
Tubes / Rings: OD Ø 50–2100 mm
- Products
- Thermoplastic semi-finished products
- Comco-PA 6 C