News

COMCO EPP manufactures and supplies polyimide, the highest-performing thermoplastic in the range. Operating temperature range from -269 °C to +400 °C, high wear resistance, stable friction level and very good electrical insulation. Available in five grades.

COMCO EPP manufactures and supplies PPSU, the tough amorphous high-performance plastic with high thermal stability, impact strength and resistance to repeated steam sterilisation. Available in an industrial grade and a medical grade.

COMCO EPP manufactures and supplies PSU, the translucent high-performance plastic with a characteristic amber tint. It combines heat resistance, creep resistance, radiation and sterilisation resistance and is approved for direct food contact.

COMCO EPP manufactures and supplies PEI, the semi-transparent amorphous high-performance plastic with a continuous service temperature of 170 °C, high dielectric strength and steam resistance. From stock, cut-to-size and as a CNC part.

COMCO EPP manufactures and supplies PEEK HPV, the carbon fibre filled and self-lubricating grade for components under high pressure, high velocity and heavy friction loads. Designed for bearings, bushings, thrust washers and seals.

COMCO EPP manufactures and supplies PEEK GF30 with 30 percent glass fibre reinforcement. The grade offers increased stiffness and dimensional stability and is supplied in natural (whitish).

COMCO EPP manufactures and supplies PEEK CF30 with 30 percent carbon fibre reinforcement. The grade offers significantly increased stiffness and load capacity compared with unfilled PEEK and is supplied in black.

COMCO EPP supplies conductive PEEK-ELS EC with a constant conductivity between 10⁴ and 10⁶ Ohm. The CNT-based modification retains almost the full physical properties of standard PEEK.

COMCO EPP manufactures and supplies PEEK in natural and black as an unfilled standard grade with the full mechanical and thermal base properties of the material. From stock, cut-to-size and as a CNC-machined part.

At COMCO EPP, we manufacture plastic components specifically engineered to meet the tough demands of crane construction and hoisting equipment.